Trident

Riding on unfathomable volumes of industrial expertise, we are providing a broad array of SBR Nitobond Chemical.

Uses:

• For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonry and slurries.

Advantages:

• Simple to use-Single component, gauged as required.
• High-Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.
• Improves-Gives weather resistant mortar with improved durability permeability to chlorides and other harmful agents
• Reduces-Provides waterproof screeds, plasters and Permeability slurries.
• Increases Improved tensile and flexure properties strength allow thin applications.
• Versatile Compatible with all common hydraulic cements.
• Cost effective Nitobond SBR (Latex) is economical to use

Description:

• Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems.
• It is resistant to hydrolysis and can therefore be used for external applications too.

Technical Support

• Fosroc provides a technical advisory service supported by a team of specialists in the field.

Properties:

• Typical mechanical properties of 1 : 3 cement sand mortar at W/C - 0.45 for control and W/C - 0.35 for mortar containing
• Nitobond SBR (Latex) ( 5 lites / 50 kg cement ).
• Tested in accordance with BS 6319 & wet cured.
• Avoid 'puddling' of the slurry coat.
• The topping must be applied on to the wet slurry.
• If the slurry dries out it must be removed and the clean substrate reprimed.

Additional Guidance:

• Prepare surfaces thoroughly.
• Toe-in at edges wherever possible to avoid feather edging.
• All surfaces including edges must be primed.
• All applications should be wet on wet, the primer must not be allowed to dry.
• The level of added water in the mix designs may need adjusting to achieve the required consistency. In general water content should be kept to the minimum necessary.
• For consistent performance the use of clean, dry sand is recommended.
• Where wet sand is used, reduce the added water level as appropriate.

Chemical resistance:

• Cementitious based materials have limited chemical resistance.
• The addition of Nitobond SBR (Latex) to cement mortars reduces permeability and therefore helps reduce the rate of attack by aggressive chemicals.

Packaging

• Nitobond SBR (Latex) is supplied in 1, 5 and 20 litre containers.

Health & Safety instructions:

• Nitobond SBR (Latex) should not come in contact with skin and eyes or be swallowed.
• Protective gloves and goggles should be worn.
• Nitobond SBR (Latex) should not come in contact with skin and eyes or be swallowed.
• If contact with skin occurs, wash well with soap and water.
• Eye contamination should be washed thoroughly with clean water and medical advice sought.
• If swallowed seek medical attention immediately - Do not induce vomiting.

Asian Paints SmartCare Multi-purpose Polymer is a high performance acrylic emulsion based binder that enables fixing of natural stones and heavy tile cladding on vertical surfaces in interiors as well as exteriors by substantially improving the adhesion of SmartCare Tile Adhesives. 

Additional Information:

• Production Capacity: 1000
• Delivery Time: IMMIDATE
• Packaging Details: 20 LTR DRUM . GST & TRANSPORTION WILL BE EXTRA

MasterStrength 1414 is a solvent-free, high performance, long pot life, versatile epoxy bonding agent. MasterStrength 1414 can be applied to both dry and damp surfaces and adheres to most substrates after proper preparation. 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 DAY
• Packaging Details: 3 KG

ReArm Bond EBA is a solvent free epoxy resin, which is supplied as a two-pack component in pre- weighed quantities for ready to mix and use condition. 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 DAY